ES DUAL 3-3 Stempel RS RST 3D

ES DUAL 3/3 RS 14.0

Multi-Post Lifting System three lifting units with S cover

VP 452020
Description

Multi-post system with three movable lifting units, with a narrow roller cover and surface-mounted support cross-beam

  • Robust, hard chrome-plated lifting posts with high bending strength
  • Torsion protection due to double cylinders
  • Corrosion-resistant hydraulic piston, because it plunges into the hydraulic oil with every stroke
  • Medium-pressure hydraulic unit installed in a space-saving manner directly on the lifting units
  • Very quiet pump and very quiet electric motor in corrosion-resistant submerged oil version, with organic oil as an option
  • Optimum safety in operation owing to system with two separate hydraulic circuits and additional electronic pressure/leak detection as standard
  • Electronic synchronisation for even lifting of the vehicle (as per EN 1493), regardless of the height of the lifting point on the vehicle
  • High level of operating comfort on the central control and programming unit thanks to two operating panels incl. text display relating to the operation of the lifting units and the raising of the lifting columns
  • High level of flexibility in use due to different operating modes
  • Group and individual operating modes enable quick and easy replacement of wheel and axle suspensions.
  • Automatic positioning program for storing and calling back up different vehicle lifting positions to save time when adjusting the movable lifting units
  • Portable control unit for convenient operation with 20 metre control line
  • Simple, integrated, pneumatically operated emergency lowering in the event of power failure
  • Flexible and custom selectable post distance due to individual cassettes
  • Robust roller cover systems with travel drive made of aluminium profile segments with non-slip surface, connected with aluminium joints
  • Narrow roller cover with on-ground support cross-beam, can be driven over with wheel loads of up to 4000 kg

Standard Delivery:

  • Three lifting units, movable, with S roller cover
  • Support cross-beam in anthracite grey (RAL 7016)
  • Vehicle support sliders are not included in the scope of delivery
  • Switch cabinet and portable operating panel
  • Pre-assembled cable harnesses per lifting unit, length: 30 m
  • Wiring and mounting materials
  • Installation cassette / installation frame not included in the scope of delivery
  • Lockable main switch
  • Operating manual and test log
  • EC CE declaration of conformity

Documents
TRUCKLIFT
DE | EN | ES | FR
ES DUAL 3/3 RS 14.0
DE | EN | ES | FR
Technical data
Load capacity CE42000 kg
Load capacity per lifting cylinder800 kg - 14000 kg
Lifting height max.2050 mm
Raising / Lowering time (load-dependent) approx.60 s / 60 s
Sliding post’s / fixed post’s installation depth2523 mm/2723 mm
Movable lifting unit’s travel range4020 mm
Support cross-beam’s width1000 mm
Post diameter2 x 125 mm
Roller cover traversable with wheel load4000 kg
Roller cover width630 mm
Operating pressure70 bar
Motor power13 kW
Fuse gG35 A
Power supply3/N/PE 400 V 50 Hz
Control unit (H x W x D)800 mm x 800 mm x 300 mm
Hydraulic fluid quantity (not included in standard delivery)195 l
Images
Request for quotation
*required fields
Our website uses cookies to provide you with the best possible service. By using this website, you agree.Data protection