
ES SQUARE II 3.0 FT
One Post Inground Lift with H mount and 3000 kg lifting capacity
VP 252231
Description |
One-post in-ground lift with H mount
H flat support bridge:
- Easier, tyre-preserving drive-on thanks to all-round bevelled pull-out elements combined with low construction height with rubber mounting plate (construction height no more than approx. 60 mm)
- Large mounting areas thanks to interchangeable mounting plate system cover the entire vehicle spectrum
- Flexible and optional range of mounting plates in versions 'longer - wider - lower' guarantee optimum mounting of all current and future vehicle models
- Rubber support plate enables time-saving direct hold
- Pinch point protection thanks to CE stop rather than foot guard
SQUARE lift unit:
- Ample freedom of movement below the lifting platform thanks to the compact post-lifting unit and resulting optimum lighting below the raised vehicle
- Outstanding rigidity and optimum safety thanks to torsion-resistant square post
- Very quiet pump and very quiet electric motor in corrosion-proof oil-submerged design, optionally with bio oil
- Electronic lift control with no-contact, wear-free limit switches and visual error display
- Very smooth running due to special long-life nickel coating on posts that promotes sliding, with robust,low-maintenance post design
- Protected internal hydraulic safety cylinders guarantee lengthy service life
- High lifting/lowering speeds are guaranteed (each max. 26 s)
- Battery-operated emergency lowering
- Optimisation of workplace ergonomics mentioned thanks to optional, standard-independent control via traffic-light energy module or flush-mounted switching system
Standard Delivery:
- Flat support bridge (FT) hot-dip galvanised
- Lift unit with hydraulic assembly
- Wiring and mounting material
- Installation box/installation frame not included in delivery
- Emergency DOWN cable for connection to switch box
- Control unit with 2 x 10 m control cables (flexible oil cables)
- Lockable master switch
- Operating manual and test log
- EC Declaration of Conformity CE
Technical data |
Load capacity CE | 3000 kg |
Lifting height max. | 1960 mm |
Lengthways holder extendible in locking positions | 1400 mm - 2000 mm |
Crosswise holder (created by reconnecting) | 880 mm - 1820 mm |
Size of support plate (L x W) | 355 mm x 400 mm |
Raising / Lowering time (load-dependent) approx. | 26 s / 20 s |
Installation depth | 2382 mm |
Post dimensions, square | 180 mm |
Operating pressure | 140 bar |
Motor power | 3 kW |
Fuse gG | 16 A |
Power supply | 3/N/PE 400 V 50 Hz |
Control unit (H x W x D) | 320 mm x 220 mm x 120 mm |
Hydraulic fluid quantity (not included in standard delivery) | 28 l |
Images |
Request for quotation