MSR 500-2 FIAT 2

MSR 500/2 CAR 4WD

Single Roller Dynamometer

VP 230038
Description

Four-wheel drive single roller dynamometer for cars with axle load of up to 2400 kg, includes an eddy-current brake and an electric motor per roller set, for installation in an existing LPS 3000 dynamometer 4WD base, ideally suited for performance measurements, tuning and diagnostic work in very powerful vehicles

  • Test speeds of up to 300 km/h
  • Tyre rolling action as it would be on the road
  • Tyres are preserved as a result of limited flexing action
  • Simple restraining mechanism for quick vehicle fixation
  • Electronically-controlled synchronisation of the speed of the front and rear roller set for current and future drive concepts with active power distribution

High level of flexibility in use due to extensive variety of operating modes, covering all fields of application:

  • Static power measurement at constant RPM Static power measurement at constant speed Static power measurement at constant tractive force
  • Dynamic power measurement with adjustable acceleration
  • MAHA towing power measurement guarantees the highest degree of accuracy when measuring power:
    Precision calculation of the parasitic losses of the dynamometer, of the vehicle's drive train and the tyre to roller friction and flex losses
  • Tachometer testing with up to ten freely selectable test points
  • Distance measurement included
  • Stopwatch function for measurement of acceleration between optional speed markers as standard
  • Optional load simulation with freely programmable load profile
  • Optional driving simulation with freely programmable speed profile
  • Option of storing programmed profiles in database

Professional, intuitive-use software for the highest expert standards with:

  • continuous graphic display and recording of up to 16 freely selectable parameters per performance measurement cycle on one measurement screen.
  • In addition to the current performance measurement cycle, fade-in of up to three stored cycles on the measurement screen for optimum comparability during calibration work
  • Two circular dial displays for RPM and speed as well as current oil temperature display, ensuring constant control of key parameters during performance measurement
  • Determination of wheel power, power dissipation, engine power and torque
  • Standardised extrapolation of motor power in line with DIN 70020, EEC 80/1269, ISO 1585, JIS D 1001 and SAE J 1349 (configuration-dependent)

  • Circular dial display of motor power, RPM, speed and tractive force during simulation cycles
  • Colour-highlighted user prompts integrated within the circular dial facilitate the accurate reproduction of simulation cycles
  • With radio remote control as standard for complete control of the dynamometer from within the vehicle.
  • Radio remote control with long-life battery and charging station
  • Cooling fan switched on and off either at the control console or with the radio remote control

  • With interface box including stand and long connection cable as standard for optimum placement at the dynamometer with MAHA plug-in CAN-DRZ module card for connecting RPM sensor.
  • Interface box optionally upgradeable with MAHA plug-in card for comprehensive recording of external Ambient data such as air temperature, air pressure, rel. humidity and intake temperature
  • Interface box optionally upgradeable with MAHA plug-in analogue input module card with 4 sensor inputs for temperature and pressure sensors or lambda sensors.
  • Optional connection of MAHA MGT 5, MDO 2 LON and MET SERIES emission testers
  • Optional connection of Krupp/AIC fuel consumption measuring instruments for petrol- and diesel engines

MCD 2000 Communication Desk

  • Robust and multifunctional metal encasement
  • Integrated switch cabinet for housing electronic components
  • Lockable drawer for keypad and PC mouse and storage compartment for small items of equipment
  • VESA standard bracket for holding the all-in-one PC or PC monitor
  • Can be extended with optional PC storage compartment or side shelves
  • Varnished with high-quality powder coating:
    ○ window grey, RAL 7040 (switch cabinet)
    ○ anthracite grey, RAL 7016, (side faces)

MSR 500/2 CAR 4WD Roller Set

  • Electronically-controlled synchronisation of the speed of the front and rear roller set
  • Electric motor in the centre of the roller set
  • Eddy-current brake on the right for each roller set
  • Cover and sliding plates, gentian blue RAL 5010
  • Hydraulic power unit with self-locking cylinder
  • Axle distance adjustment via radio remote control
  • Coating: powder coating, gentian blue, RAL 5010

Standard Delivery:

MCD 2000

  • MCD 2000 Communication Desk
  • interface box 1 including stand and connection cable with plug-in environment module (CAN-PTH module) card for recording air temperature, air pressure, humidity with plug-in RPM module (CAN-DRZ module) card for RPM recording via trigger clamp, light signal sensor, piezo clamp, clamp W and TDC sensor (insertion of max. 4 modules per box possible)
  • Radio remote control for dynamometer operation with battery and charging station
  • Cooling fan control
  • Measuring program

Roller Set

  • Self-supporting closed roller set with an eddy-current brake for the front axle and electric motor
  • Self-supporting closed roller set with an eddy-current brake for the rear axle and electric motor
  • Hydraulic roller set adjustment with sliding plate set for 4WD floor unit
  • Converter cabinet for electric motor control

Documents
POWERDYNO
DE | EN | ES | FR
MSR 500/2
DE | EN | ES | FR
Technical data
Axle load2500 kg
Compressed air max.7 bar
Track width700 mm - 2200 mm
Roller set rotating mass280 kg
Roller diameter504 mm
Test speed max.300 km/h
Wheel power, rear axle (static) max.260 kW
Wheel power, rear axle (dynamic) peak >1000 kW
Wheel power, front axle (static) max.260 kW
Wheel power, front axle (dynamic) peak >1000 kW
Tractive force Rear axle max.14000 N
Tractive force Front axle max.7000 N
Two electric motors each with a drive power rating of22 kW
Trailing axle: maximum speed approx.210 km/h
Trailing axle: maximum acceleration.0.8 m/s²
Two electric motors each with a drive power rating of (optional)30 kW
Trailing axle: maximum speed approx. (optional)240 km/h
Trailing axle: maximum acceleration (optional)1.5 m/s²
Measurement accuracy wheel power measurement (from measured value) +/-2 %
Wheelbase min.2200 mm
Wheelbase max.3100 mm
Adjustment track900 mm
Fuse gG63 A
Power supply3/N/PE 400 V 50 Hz
Dimesions communication desk (H x W x D)1560 mm x 860 mm x 420 mm
Converter cabinet dimensions (H x W x D)1000 mm x 800 mm x 400 mm
Dimensions roller set (L x W x H)1095 mm x 4100 mm x 512 mm
Dynamometer dimensions (L x W x H)4300 mm - 5400 mm x 4100 mm x 512 mm
Weight roller set1300 kg
Communication desk weight incl. packaging150 kg
Images
Request for quotation
*required fields
Our website uses cookies to provide you with the best possible service. By using this website, you agree.Data protection