
ZS SQUARE II 3.5 SP
Two Post Inground Lift with swing arm support and 3500 kg load capacity
VP 252240
Description |
Two-post in-ground lift with SP swing arm support and wheel guides
Swing arm support with wheel guides:
- Swing arm support with continuously telescoping 3-part support arms for large and flexible support area
- Large drive-through width with drive-over wheel guides (100 mm clearance) to facilitate driving onto the lift
- Automatic support-arm restraint can be reached particularly easily from above for manual readjustment of the support arms in raised set-up condition
- Very flat sports car swing arm support with very low minimum pad heights of 73 / 58 / 65 / 84 mm for very flat vehicles
- Accurate take-up of vehicles thanks to standard height-adjustable turning plates with thread and plug-in system
- Support raisers and form-locking vehicle mounts for secure vehicle fixing in the product range
- Optional flush installation with hinged-lid frame for flexible use of work area (various models)
- Optional increase of max. lifting height to 2153 mm in conjunction with a deeper installation box (VZ 972520, various models)
- Pinch point protection thanks to CE stop rather than foot guard
SQUARE lift unit:
- Ample freedom of movement below the lifting platform thanks to the compact post-lifting unit and resulting optimum lighting below the raised vehicle
- Outstanding rigidity and optimum safety thanks to torsion-resistant square post
- Very quiet pump and very quiet electric motor in corrosion-proof oil-submerged design, optionally with bio oil
- Electronic lift control with no-contact, wear-free limit switches and visual error display
- Very smooth running due to special long-life nickel coating on posts that promotes sliding, with robust, low-maintenance post design
- Protected internal hydraulic safety cylinder guarantee lengthy service life
- Mobile synchronisation and safety yoke for careful distribution of force in the post guide as standard
- High lifting/lowering speeds are guaranteed (max. 30/20 s)
- Battery-operated emergency lowering
- Optimisation of workplace ergonomics mentioned thanks to optional, standard-independent control via traffic-light energy module or flush-mounted switching system
Standard Delivery:
- Swing arm support (SP) with swing arm holder and swing arm extensions, anthracite grey (RAL 7016)
- Support disc and support raiser 50 mm
- Wheel nut tray, magnetic (2 pcs.)
- Lift unit with movable yoke
- Wiring and mounting material
- Installation box/installation frame not included in delivery
- Emergency DOWN cable for connection to switch box
- Control unit with 2 x 10 m control cables (flexible oil (cables)
- Lockable master switch
- Operating manual and test log
- EC Declaration of Conformity CE
Technical data |
Load capacity CE | 3500 kg |
Lifting height max. | 1997 mm |
Raising / Lowering time (load-dependent) approx. | 30 s / 20 s |
Installation depth | 2382 mm |
Piston centers | 2500 mm |
Post dimensions, square | 180 mm |
Swing arm pivot point spacing | 2700 mm |
Swing arm extension | 530 mm - 1020 mm |
Disc adjustment range | 73 mm - 97 mm |
Disk adapter extenders | 50 mm |
Total width | 2910 mm |
Drive-through width | 2550 mm |
Operating pressure | 160 bar |
Motor power | 3 kW |
Fuse gG | 16 A |
Power supply | 3/N/PE 400 V 50 Hz |
Control unit (H x W x D) | 320 mm x 220 mm x 120 mm |
Hydraulic fluid quantity (not included in standard delivery) | 28 l |
Images |
Request for quotation