Schwenkarm 6500kg SQUARE II

ZS SQUARE II 6.5 KS

Two Post Inground Lift with swing arm support and 6500 kg load capacity

VP 252214
Description

Two-post in-ground lift with swing arm support

Swing arm support:

  • Swing arm support with continuously telescoping 3-part support arms for large and flexible support area
  • Large drive-through width with large post spacing to facilitate driving onto the lift
  • Automatic support-arm restraint can be reached particularly easily from above for manual readjustment of the support arms in raised set-up condition
  • Accurate take-up of vehicles thanks to standard height-adjustable turning plates with thread and plug-in system
  • Support raisers and form-locking vehicle mounts for secure vehicle fixing in the product range
  • Pinch point protection thanks to CE stop rather than foot guard

SQUARE lift unit:

  • Ample freedom of movement below the lifting platform thanks to the compact post-lifting unit and resulting optimum lighting below the raised vehicle
  • Outstanding rigidity and optimum safety thanks to torsion-resistant square post
  • Very quiet pump and very quiet electric motor in corrosion-proof oil-submerged design, optionally with bio oil
  • Electronic lift control with no-contact, wear-free limit switches and visual error display
  • Very smooth running due to special long-life nickel coating on posts that promotes sliding, with robust, low-maintenance post design
  • Protected internal hydraulic safety cylinder guarantee lengthy service life
  • Mobile synchronisation and safety yoke for careful distribution of force in the post guide as standard
  • High lifting/lowering speeds are guaranteed (max. 35/35 s)
  • Battery-operated emergency lowering
  • Optimisation of workplace ergonomics mentioned thanks to optional, standard-independent control via traffic-light energy module or flush-mounted switching system

Standard Delivery:

  • Swing arm support (K 6.5) with swing arm holder and swing arm extensions, anthracite grey (RAL 7016)
  • Support disc and support raiser 50 mm
  • Wheel nut tray, magnetic (2 pcs.)
  • Lift unit with movable yoke
  • Wiring and mounting material
  • Installation box/installation frame not included in delivery
  • Emergency DOWN cable for connection to switch box
  • Control unit with 2 x 10 m control cables (flexible oil cables)
  • Lockable master switch
  • Operating manual and test log
  • EC Declaration of Conformity CE

Documents
SQUARE
DE | EN | ES | FR
ZS SQUARE II 6.5 KS
DE | EN | ES | FR
Technical data
Load capacity CE6500 kg
Lifting height max.2063 mm
Raising / Lowering time (load-dependent) approx.35 s / 35 s
Installation depth2382 mm
Piston centers2700 mm
Post dimensions, square180 mm
Swing arm pivot point spacing3200 mm
Swing arm extension861 mm - 1880 mm
Disc adjustment range123 mm - 163 mm
Disk adapter extenders50 mm
Total width3380 mm
Drive-through width2440 mm
Operating pressure215 bar
Motor power3 kW
Fuse gG16 A
Power supply3/N/PE 400 V 50 Hz
Control unit (H x W x D)320 mm x 220 mm x 120 mm
Hydraulic fluid quantity (not included in standard delivery)28 l
Images
Request for quotation
*required fields
Our website uses cookies to provide you with the best possible service. By using this website, you agree.Data protection